↧
VW T4 2.5 ACU Immo OFF
↧
VW Polo 2011 Immo OFF
↧
↧
VW Golf 4 Bosch ME7.1 DTC OFF
↧
VW Golf MK6 Immo & Keys Programming
Hi to all friends, how are you?
I have a Golf MK6 that instrument cluster is dead, was pour water on it.
The client found another instrument cluster, so what is the first step for to program his keys?
Thank you very much.
I have a Golf MK6 that instrument cluster is dead, was pour water on it.
The client found another instrument cluster, so what is the first step for to program his keys?
Thank you very much.
↧
VW Polo 1.4 03C906024BJ SW : 8997 Original File
↧
↧
Audi A6 4F BCM Retrofit
Hi!
I have A6 4F with BCM 4F0910279 K, i need higher index for retrofit from facelift model.
Is it possible to flash K to N or is HW different? Can anyone maybe help me with this .sgo file?
Thanks.
Chris
I have A6 4F with BCM 4F0910279 K, i need higher index for retrofit from facelift model.
Is it possible to flash K to N or is HW different? Can anyone maybe help me with this .sgo file?
Thanks.
Chris
↧
VW Scirocco 2009 Dashboard Issue
Hi.
I have here a 2009 Scirocco with dash faults, It does not energise the coil reader for the key. I was wondering if anyone has a set of dumps (eeprom and flash) for a 1K8920970F cluster. The battery went flat and wondering if it has a faulty flash now.
Any help is much appreciated.
I have here a 2009 Scirocco with dash faults, It does not energise the coil reader for the key. I was wondering if anyone has a set of dumps (eeprom and flash) for a 1K8920970F cluster. The battery went flat and wondering if it has a faulty flash now.
Any help is much appreciated.
↧
VW Touareg 2006 3.0 TDi ECU Issue
Hi!
ECU on this car (7L0 907 401) is broken and there is no comms with it. I've opened it and there is few burn marks, so i read the eeprom to get the pin code.
Owner brought secondhand ECU (3D0 907 401) and said that guy who sold it claims that they are the same. I think not... I have read pin from that ECU and made adaptation. Car starts ok, but there is a several problems. I think it is because of wrong coding, but i don't have coding from old ECU.
Thing is that i don't want to open this secondhand ECU to transfer flash from the old one.
Here is VCDS log file if someone can help.
Thanks!
ECU on this car (7L0 907 401) is broken and there is no comms with it. I've opened it and there is few burn marks, so i read the eeprom to get the pin code.
Owner brought secondhand ECU (3D0 907 401) and said that guy who sold it claims that they are the same. I think not... I have read pin from that ECU and made adaptation. Car starts ok, but there is a several problems. I think it is because of wrong coding, but i don't have coding from old ECU.
Thing is that i don't want to open this secondhand ECU to transfer flash from the old one.
Here is VCDS log file if someone can help.
Thanks!
touareg Log-WVGZZZ7LZ6D041164-235830km-146537mi.txt | ||
File Type: |
![]() |
![]() |
Downloaded: | 6 times | |
Size: | 13.19 KB |
↧
VAG PCR 2.1 ECU Pin Out [SOLVED!]
Hi.
I have PCR2.1 ECU 03L 906 23LK, looking for its pin out to be able to read, its flash on bench not only unlock it, ECU has lost glow light on dash and cant connect with it via OBD II. I need pin out to be able to connect with it on bench. Maybe can be able to write original file or make update flash?
Thanks.
I have PCR2.1 ECU 03L 906 23LK, looking for its pin out to be able to read, its flash on bench not only unlock it, ECU has lost glow light on dash and cant connect with it via OBD II. I need pin out to be able to connect with it on bench. Maybe can be able to write original file or make update flash?
Thanks.
↧
↧
VW Touran 2008 Immo Issue
Hi to all friends, how are you?
I have a problem with this car, the owner bought it with this malfunction.
In the cluster it says: IMMOBILIZER ACTIVE. The car is 2008 year.
I got another ECU and dash from 2004 car and again the same thing, i did not change key, so i used the same key with both ECU's and dash.
The car start very well in all cases, so what i need to do to erase this note please?
Thank you very much.
I have a problem with this car, the owner bought it with this malfunction.
In the cluster it says: IMMOBILIZER ACTIVE. The car is 2008 year.
I got another ECU and dash from 2004 car and again the same thing, i did not change key, so i used the same key with both ECU's and dash.
The car start very well in all cases, so what i need to do to erase this note please?
Thank you very much.
picture one.jpg | ||
File Type: |
![]() |
![]() |
Downloaded: | 10 times | |
Size: | 72.56 KB |
↧
Audi A8 2008 TCM Component Protection
Hi!
Using AVDI to do Secutity Protection OFF on the Transmission ECU but can not find how it is done. The fault code is blocked TCM but has not been Changed or touched but communication is OK. The GearBox had only valve body replaced.
Regards
kmpg
Using AVDI to do Secutity Protection OFF on the Transmission ECU but can not find how it is done. The fault code is blocked TCM but has not been Changed or touched but communication is OK. The GearBox had only valve body replaced.
Regards
kmpg
↧
Audi A3 8P Mileage Correction
↧
Audi A4 2014 EDC17C64 ECU Reading Issue
Hello.
I tried to read Audi A4 edc17c64 via Magpro x17 but got error. After that ECU is dead.
Now i have problem because car can't to start and have no communication.
I tried to read Audi A4 edc17c64 via Magpro x17 but got error. After that ECU is dead.
Now i have problem because car can't to start and have no communication.
↧
↧
VW Passat 3C0920870Q 24C32 Original Dump File
I need dump 24C32.
↧
Audi Siemens ECU PIN Code From Dump
↧
VW Polo 1.2 TSi 6R Original ECU File
Hi all.
Need virgin original ECU file of Volkswagen Polo 1.2 TSi 6R.
VIN: wvwzzz6rzbu036617
Engine: CBZB
Continental
Part Number: 03F906070E
03F906070D SIMOS 10.20 H/W H02 5WP44627.
This ECU data corrupted after software update, please help.
Need virgin original ECU file of Volkswagen Polo 1.2 TSi 6R.
VIN: wvwzzz6rzbu036617
Engine: CBZB
Continental
Part Number: 03F906070E
03F906070D SIMOS 10.20 H/W H02 5WP44627.
This ECU data corrupted after software update, please help.
↧
VW Passat EDC17CP14 ECU Cloning
Hey guys!
I have an EDC17CP14 here that I need to replace.
I have open and read original ECM with K-Tag. It have a XROM TC1796 with external flash S29CD016G.
Can I just clone those ECM's?
My guess is that there will be OTP section which will prevent me to do so...
So I would need to change my MAC-PIN-CS-VIN and correct checksum... Am I right to think so?
In K-Tag software, I have a message like this one: To enable serial programming on this ECU:
1-Make a backup
2-Hit the enable button
3-Select the backup file
4-Wait for the operation to complete
5-For any change to the ecu, you must use the file containing the word 'patch'
So maybe I can copy, but not sure, so don't want to mess up anything.
It is 2:30 am here, so I let that one go. I'll open second hand unit tomorrow and give you dump as soon as I can.
For now, here is original backup. (I didn't hit the enable button yet).
Also, I only have ECM in hand, but I have AVDI... maybe it would be an easy job via OBD? (Can I do on bench)?
Thanks for your time once more guys!![hi hi]()
I have an EDC17CP14 here that I need to replace.
I have open and read original ECM with K-Tag. It have a XROM TC1796 with external flash S29CD016G.
Can I just clone those ECM's?
My guess is that there will be OTP section which will prevent me to do so...
So I would need to change my MAC-PIN-CS-VIN and correct checksum... Am I right to think so?
In K-Tag software, I have a message like this one: To enable serial programming on this ECU:
1-Make a backup
2-Hit the enable button
3-Select the backup file
4-Wait for the operation to complete
5-For any change to the ecu, you must use the file containing the word 'patch'
So maybe I can copy, but not sure, so don't want to mess up anything.
It is 2:30 am here, so I let that one go. I'll open second hand unit tomorrow and give you dump as soon as I can.
For now, here is original backup. (I didn't hit the enable button yet).
Also, I only have ECM in hand, but I have AVDI... maybe it would be an easy job via OBD? (Can I do on bench)?
Thanks for your time once more guys!

10 passat EDC17cp14.rar | ||
File Type: |
![]() |
![]() |
Downloaded: | 1 times | |
Size: | 1.18 MB |
↧
↧
Skoda SuperB Bolero Login Code
↧
VW Golf 7 AirBag Crash Data Clear
↧
VW Passat EDC17CP14 Immo Issue
Hello.
I have VW Passat EDC17CP14 for Immo OFF with MagicMotor Sports.
All working good car start, but the problem:
1. Central lock not working.
2. Trunk not open.
3. Diesel lock not open.
4. Parking break not working.
In all modules error = Anti Thief Active
I don't have old ESL & ESL data.
I tried with new ESL with AVDI but Immo [25] not communication.
Please any one help me.
Thanks.
I have VW Passat EDC17CP14 for Immo OFF with MagicMotor Sports.
All working good car start, but the problem:
1. Central lock not working.
2. Trunk not open.
3. Diesel lock not open.
4. Parking break not working.
In all modules error = Anti Thief Active
I don't have old ESL & ESL data.
I tried with new ESL with AVDI but Immo [25] not communication.
Please any one help me.
Thanks.
↧